Cisco交换机综合实例(二)
作者 佚名技术
来源 网络技术
浏览
发布时间 2012-07-01
| -F1> (enable) set trunk 3/1-4 off Port(s) 3/1-4 trunk mode set to off. 4003-ER-F1> (enable) set spantree portfast 3/1-4 enable Warning: Spantree port fast start should only be enabled on ports connected to a single host. Connecting hubs, concentrators, switches, bridges, etc. to a fast start port can cause temporary spanning tree loops. Use with caution. Spantree ports 3/1-4 fast start enabled. 4003-ER-F1> (enable) set vlan 10 3/1-2 VLAN 10 modified. VLAN 1 modified. VLAN Mod/Ports ---- ----------------------- 10 2/1-2 3/1-2 4003-ER-F1> (enable) set vlan 20 3/3 VLAN 20 modified. VLAN 1 modified. VLAN Mod/Ports ---- ----------------------- 20 2/1-2 3/3 4003-ER-F1> (enable) set vlan 40 3/4 VLAN 40 modified. VLAN 1 modified. VLAN Mod/Ports ---- ----------------------- 40 2/1-2 3/4 4003-ER-F1> (enable) 4. RSM 的配置 对于RSM模块的命令与Cisco的路由器相似 下面给出配置清单 5509-ER-F1> (enable) session 3 Trying Router-3... Connected to Router-3. Escape character is ''^]''. Router>enable Router#configure terminal Enter configuration commands, one per line. End with CNTL/Z. Router(config)#hostname RSM-ER-F1 RSM-ER-F1(config)#enable password extra_secret_word RSM-ER-F1(config)#line vty 0 6 RSM-ER-F1(config-line)#password secret_word RSM-ER-F1(config-line)#ip domain-name bigcorp.com RSM-ER-F1(config)#ip name-server 10.10.10.100 RSM-ER-F1(config)#ip domain-lookup RSM-ER-F1(config)#interface vlan 1 RSM-ER-F1(config-if)#description default (vlan1) VLAN interface RSM-ER-F1(config-if)#ip address 10.10.1.1 255.255.255.0 RSM-ER-F1(config-if)#no shutdown RSM-ER-F1(config-if)#interface vlan 10 RSM-ER-F1(config-if)#description Corporate (vlan10) VLAN interface RSM-ER-F1(config-if)#ip address 10.10.10.1 255.255.255.0 RSM-ER-F1(config-if)#no shutdown RSM-ER-F1(config-if)#interface vlan 20 RSM-ER-F1(config-if)#description DevEng (vlan20) VLAN interface RSM-ER-F1(config-if)#ip address 10.10.20.1 255.255.255.0 RSM-ER-F1(config-if)#no shutdown RSM-ER-F1(config-if)#interface vlan 30 RSM-ER-F1(config-if)#description Mfg (vlan30) VLAN interface RSM-ER-F1(config-if)#ip address 10.10.30.1 255.255.255.0 RSM-ER-F1(config-if)#no shutdown RSM-ER-F1(config-if)#interface vlan 40 RSM-ER-F1(config-if)#description QA (vlan40) VLAN interface RSM-ER-F1(config-if)#ip address 10.10.40.1 255.255.255.0 RSM-ER-F1(config-if)#no shutdown RSM-ER-F1(config-if)#interface vlan 50 RSM-ER-F1(config-if)#description Finance&Admin (vlan50) VLAN interface RSM-ER-F1(config-if)#ip address 10.10.50.1 255.255.255.0 RSM-ER-F1(config-if)#no shutdown RSM-ER-F1(config-if)#interface vlan 60 RSM-ER-F1(config-if)#description Sales&Mktg (vlan60) VLAN interface RSM-ER-F1(config-if)#ip address 10.10.60.1 255.255.255.0 RSM-ER-F1(config-if)#no shutdown RSM-ER-F1(config-if)#^Z [1] [2] 下一页 |
凌众科技专业提供服务器租用、服务器托管、企业邮局、虚拟主机等服务，公司网站：http://www.lingzhong.cn 为了给广大客户了解更多的技术信息，本技术文章收集来源于网络,凌众科技尊重文章作者的版权，如果有涉及你的版权有必要删除你的文章，请和我们联系。以上信息与文章正文是不可分割的一部分,如果您要转载本文章,请保留以上信息，谢谢! |
你可能对下面的文章感兴趣
上一篇: 路由器配置成X.25交换机下一篇: 基于Cat4908-l3和Cat3500园区网实例
关于Cisco交换机综合实例(二)的所有评论
