一：安装ICMP SHELL
 下载ish-v0.2.tar.gz程序,下载地址：http://cdnetworks-kr-1.dl.sourceforge.net/project/icmpshell/ish/v0.2/ish-v0.2.tar.gz,或者可以到附件中去下载.
- wget http://cdnetworks-kr-1.dl.sourceforge.net/project/icmpshell/ish/v0.2/ish-v0.2.tar.gz
- tar zxvf ish-v0.2.tar.gz
- cd ISHELL-v0.2/
- make linux
第四步可根据自己是实际情况而定,你可以先执行make命令,然后它会给你提示：
我这里是redhat系统, make linux.
好了,现在就安装好了,简单吧.
二：ICMP SHELL的应用
大家也可以看README文件.
Usage: Server
=============
ICMP Shell v0.1 (server) - by: Peter Kieltyka
usage: ./ishd [options]
options:
-h Display this screen
-d Run server in debug mode
-i <id> Set session id; range: 0-65535 (default: 1515)
-t <type> Set ICMP type (default: 0)
-p <packetsize> Set packet size (default: 512)
example:
./ishd -i 65535 -t 0 -p 1024
Usage: Client
=============
ICMP Shell v0.1 (client) - by: Peter Kieltyka
usage: ./ish [options] <host>
options:
-i <id> Set session id; range: 0-65535 (default: 1515)
-t <type> Set ICMP type (default: 0)
-p <packetsize> Set packet size (default: 512)
example:
./ish -i 65535 -t 0 -p 1024 host.com
ICMP Type Reference
===================
Here is a list of icmp types that you can use with ISHELL:
Type Name Reference
---- ------------------------- ---------
0 Echo Reply [RFC792]
1 Unassigned [JBP]
2 Unassigned [JBP]
3 Destination Unreachable [RFC792]
4 Source Quench [RFC792]
5 Redirect [RFC792]
6 Alternate Host Address [JBP]
7 Unassigned [JBP]
8 Echo [RFC792]
9 Router Advertisement [RFC1256]
10 Router Selection [RFC1256]
11 Time Exceeded [RFC792]
12 Parameter Problem [RFC792]
13 Timestamp [RFC792]
14 Timestamp Reply [RFC792]
15 Information Request [RFC792]
16 Information Reply [RFC792]
17 Address Mask Request [RFC950]
18 Address Mask Reply [RFC950]
19 Reserved (for Security) [Solo]
20-29 Reserved (for Robustness Experiment) [ZSu]
30 Traceroute [RFC1393]
31 Datagram Conversion Error [RFC1475]
32 Mobile Host Redirect [David Johnson]
33 IPv6 Where-Are-You [Bill Simpson]
34 IPv6 I- |
